AAT in the market.
3.675 lbs (1.66kg)
in the market.
carriers requirements for accuracy.
Heading: <0.75° RMS*
Tilt/Roll: <0.5° RMS*
*Depends on multipath environment, number of satellites in view, satellite geometry and ionospheric activity.
Operation time: 11 hours
USB. No post-processing software required.
The Aligner has an
internal memory of 4GB
Operating temp: -4 to 140°F (-20 to 60°C)
Storage temp: -30°F to 70°F (-22 to 158°C)
Humidity: 95% non-condensing
EMC: FCC part 15, subpart B, CISPR22, CE
Antenna Alignment Tool
The 3Z RF Aligner is the world’s leader Antenna Alignment Tool for both panel antennas and microwave systems. The 3Z RF Aligner reduces site re-visits and re-climbs by optimizing network Performance.
The 3Z RF Aligner is the most compact GPS Antenna Alignment Tool in the industry. It incorporates GPS Technology to calculate precise Azimuth, Tilt, Roll and AGL measurements for a multitude of directional antenna systems. Our universal antenna mounting system is used for quick antenna attachment and release. The 3Z RF Aligner is user friendly and easy to transport up any tower. Save all your antenna installation measurements for recordkeeping and reporting; easily accessible over USB.
Watch the 3Z Rf Aligner
3Z RF Aligner at a Glance
The 3Z RF Aligner was designed for RF Engineers as well. During site inspections, site troubleshooting, and new site design most RF Engineers carry a compass, GPS, and a range finder. The 3Z RF Aligner replaces all these devices, making field visits a breeze.
Microwave Antenna Alignment Tool
The 3Z RF Aligner is used to calculate microwave path target data and also align the microwave path. The 3Z RF Aligner has a microwave antenna alignment mode designed to align microwave antennas regardless of the frequency band.
Wherever microwave links exist, the path between antennas has always required accurate antenna alignment. This process requires highly trained tower crews to physically align the antennas as well as ground technicians and sophisticated, expensive, and complex test equipment to monitor the results. The process is now optimized and can now be accomplished with the 3Z RF Aligner by the tower crew without the need of additional ground technicians or additional equipment, or indeed, even the wave guides or radios installed.
Using GPS Technology the 3Z RF Aligner is a complete test solution designed to quickly and accurately optimize the transmission path between two microwave antennas. Completely outfitted with everything needed to align a microwave link, the link alignment process is completed without the need of radios, multiple test sets, ground technicians, on site AC power, cell phones, or additional two-way radios. Save all your microwave antenna alignment measurements for recordkeeping, easily accessible over USB.
Antenna Alignment Ground Inspections
The 3Z RF Aligner was designed by RF engineers. During site inspections, site troubleshooting and new site design, most RF Engineers carry a compass, GPS and a range finder. The 3Z RF Aligner replaces all these devices, making field visits a breeze.
Ensure Proper 4G Antenna Integration and Performance
When 4G antennas are installed, the 3Z RF Aligner helps the RF engineers ensure Antenna azimuth is within target specifications.
Note: A magnetic compass cannot be used on most rooftops. The 3Z RF Aligner can be used anywhere a GPS signal is available.