-
Summary 3Z Telecom is ready for 5G rollout. With the Small Cell Reference Plate connected to the Strap Clamp you can use the RF Vision on small cells or any cylindrical stealth antennas. Strap Clamp sold separately. The Problem We Solve Small cells or cylindrical stealth antennas have a reference point for the alignment tools to be mounted. Mounting the tool incorrectly can lead to misalignment. How We Solve It! With the Small Cell Reference Plate, you can attach the Strap Clamp following the reference point. -
Summary
The Strap Clamp was designed to quickly mount the RF Vision or 3Z RF Aligner to a wide variety of antenna types. 360 Degree Mounting Capabilities. Standard Webbing for antennas up to 2.5' diameter - included. Longer webbing for antennas up to 12' diameter - sold separately.The Problem We Solve
In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.How We Solve It!
The Strap Clamp was designed to be an all-in-one mounting solution for both panel antennas and microwave dishes. With its modular configuration, the Strap Clamp can be used for forward, reverse, +90 or -90 degrees orientation. In addition to its flexibility, it is also light weight, precise, and easy to use. -
Summary
The Ericsson AIR Mоunt wаѕ dеѕіgnеd tо bе a lіghtwеіght, precise and еаѕу tо uѕе mоuntіng solution fоr thе Ericsson AIR21 and AIR32 antennas.The Problem We Solve
Due to the uniqueness of the Ericsson AIR21 and AIR32 antennas, standard clamps do not attach well. These antennas require a specialty clamp for proper alignment.How We Solve It!
The Ericsson AIR Mоunt allows fоr ԛuісk іnѕtаllаtіоn оf the RF Vision and 3Z RF Alіgnеr onto thе AIR21 and AIR32 bу utіlіzіng ball bearings tо spin mоuntіng роѕtѕ оntо еxіѕtіng AIR bracket hаrdwаrе. Thе mоdulаr dеѕіgn оf thе AIR Mount еnаblеѕ thе 3Z RF Alіgnеr and RF Vision tо bе installed fоrwаrd, rеvеrѕе, +90 or -90 dеgrееѕ orientation. -
Summary
The Lip Clamp was designed to quickly mount the RF Vision or 3Z RF Aligner to a wide variety of microwave parabolic dishes in all sizes.The Problem We Solve
Some small and odd shape microwave antennas do not work well with standard mounting clamps. These antennas require a specialty clamp for proper alignment.How We Solve It!
The Lip Clamp is equipped with an adjustable clamping system that was specifically designed to mount onto small and odd shape microwave antennas . It is not only compact but also light weight and easy to use. -
Summary
Similar to the standard Lip Clamp (3Z-RFV-LIPC), the Extended Lip Clamp allows attachment to antenna features that are up to 10 inches in width.The Problem we Solve
Some microwave antennas have features that require wider clamping width for safe attachment of the RF Vision.How We Solve It
The Extended Lip Clamp has a wide, but easily adjustable clamping system that will accommodate antenna features up to 10 inches wide for mounting your RF Vision safely and quickly. -
Summary
Similar to the Extended Lip Clamp, the Extended Lip Clamp with L-back plate allows attachment to antenna features that are up to 11 inches in width. The Problem we Solve: Some microwave antennas have features that require wider clamping width for safe attachment of the RF Vision.How We Solve It
The Top Clamp has a wide and adjustable clamping width with a large clamp contact area, perfectly suitable for safe and rapid mounting of the RF Vision to the top of panel antennas. The Top Clamp has a “stepped L” back design to accommodate a variety of antenna types and sizes. -
Summary
The Top Clamp is used to mount the RF Vision to the top of cellular panel antennasThe Problem we Solve
Some panel mount antenna installations do not easily accommodate back or side mounting of the RF Vision using the standard Universal strap clamp.How We Solve It
The Top Clamp has a wide and adjustable clamping width with a large clamp contact area, perfectly suitable for safe and rapid mounting of the RF Vision to the top of panel antennas. The Top Clamp has a “stepped L” back design to accommodate a variety of antenna types and sizes. -
Summary
The Nokia FASb Standoffs (4pcs.) were designed as an add-on for the Strap Clamp. This integrated mounting solution is precise and еаѕу tо uѕе with thе Nokia FASb antennas. Strap Clamp sold separately.The Problem We Solve
Due to the uniqueness of the Nokia FASb antennas, standard clamps do not attach well. These antennas require a specialty clamp for proper alignment.How We Solve It!
Using the Strap Clamp with the Nokia FASb Standoffs allows fоr ԛuісk іnѕtаllаtіоn оf the RF Vision and 3Z RF Alіgnеr onto thе Nokia FASb antennas. -
Summary
This pair of straps іѕ specifically dеѕіgnеd tо work wіth the Strар Clаmр and will fit antennas of up to 10’ in diameter. The Strap Clamp includes standard webbing to fit antennas of up to 2.5’ diameter. Additional sizes to fit antennas up to 6’ in diameter or 12’ in diameter are also available. Strap Clamp sold separately.The Problem We Solve
In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.How We Solve It!
With the 10’ Diameter Webbing Straps, the Tower Technician will be able to use the Strap Clamp for a variety of antennas of up to 10’ in diameter. -
Summary
This pair of straps іѕ specifically dеѕіgnеd tо work wіth the Strар Clаmр and will fit antennas of up to 12’ in diameter. The Strap Clamp includes standard webbing to fit antennas of up to 2.5’ diameter. Additional sizes to fit antennas up to 6’ in diameter or 10’ in diameter are also available. Strap Clamp sold separately.The Problem We Solve
In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.How We Solve It!
With the 12’ Diameter Webbing Straps, the Tower Technician will be able to use the Strap Clamp for a variety of antennas of up to 12’ in diameter. -
Summary
This pair of straps іѕ specifically dеѕіgnеd tо work wіth the Strар Clаmр and will fit antennas of up to 6’ in diameter. The Strap Clamp includes standard webbing to fit antennas of up to 2.5’ diameter. Additional sizes to fit antennas up to 10’ in diameter or 12’ in diameter are also available. Strap Clamp sold separately.The Problem We Solve
In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.How We Solve It!
With the 6’ Diameter Webbing Straps, the Tower Technician will be able to use the Strap Clamp for a variety of antennas of up to 6’ in diameter. -
Summary
Designed for Field Technicians and RF Engineers, our Ground Verification System allows non-climbers to verify antenna alignment and height from ground level. (RF Vision and Bluetooth Laser Range Finder are sold separately.)The Problem We Solve
For some Mobile Operators, the process of dispatching a tower crew can be very lengthy. When troubleshooting poor site preformance, it is important to quickly verify if antenna alignment is the root cause.How We Solve It!
Prior to dispatching a tower crew, Field Technicians and RF Engineers can quickly determine if antenna alignment is the root cause of site performance degragation. Proper antenna alignment in conjunction with accurrate height is important to ensure optimal site perfomance. Our Ground Verification System allows you to verify both. -
Summary
Antenna WASP is a Wireless Antenna Sensor Pod that when attached to an antenna, hourly monitors its alignment in three dimensions: azimuth, tilt and roll. Antenna WASP will detect and report any undesired changes to all antennas being monitored (up to 18 antennas per site). The complete Antenna Alignment Monitoring Solution requires a Data Collector, sold separately. Optional accessory: 3Z Torque Wrench is the ideal tool to properly seal Antenna WASP and highly recommended. Sold separately.The Problem We Solve
After identifying network performance issues or following a natural disaster, Wireless Operators are required to perform costly network audits to improve RAN KPI’s and validate site equipment assets. Currently, most of the site equipment assets can be remotely monitored with the standard Telecom Management Software Solutions except the antenna mechanical alignment, creating a challenge & increasing the OPEX to the Wireless Operators in these situations. Without the right information regarding the problem or its location, operation teams take longer to troubleshoot antenna problems at site and may be unable to fix it during the same visit.How We Solve It!
Antenna WASP offers hourly antenna alignment monitoring on all wireless network antennas. Any changes in the antenna’s orientation (Azimuth, Tilt & Roll) is transmitted to the Data Collector wirelessly, the Data Collector then forwards this information to the Wireless Operator’s NOC via SNMP or displays the information via the Data Collector Manager Software. Wireless Operators define alignment thresholds and when these thresholds are exceeded, an alarm will be generated and the Operator will be notified immediately. Each antenna can be individually identified on a tower or throughout the entire network. This allows Wireless Operators to act quickly and restore communications to optimal performance by being able to send the correct team to the exact location with the right tools. -
Out of stock
The 3Z RF Aligner is the most compact GPS Antenna Alignment Tool in the industry. It incorporates GPS technology to calculate precise Azimuth, Tilt, Roll and AGL measurements for a multitude of directional antenna systems. Our universal antenna mounting system is used for quick antenna attachment and release. The 3Z RF Aligner is user friendly and easy to transport up any tower. Save all your antenna installation measurements for record keeping and reporting; easily accessible over USB. -
Summary
To experience the full capabilities of your RF Vision, it is required to purchase a lifetime Camera License Key. $300.00 Discount when purchased with a new RF Vision.The Problem We Solve
The world around your antennas is constantly changing. New building constructions, growing tree lines, etc. will degrade your coverage objectives and create unhappy customers.How We Solve It!
Never been done before! For the first time an antenna alignment tool not only aligns the antenna but it will show you where it is pointing. Only RF Vision will allow you to see these obstructions and give Radio Engineers the ability to optimize antenna orientations. A line-of-sight image that is mechanically aligned with the tool will be included on each antenna alignment report. -
Summary
To experience the full capabilities of your RF Vision, it is required to purchase a lifetime Camera License Key. $300.00 Discount when purchased with a new RF Vision.See More [+]The Problem We Solve
The world around your antennas is constantly changing. New building constructions, growing tree lines, etc. will degrade your coverage objectives and create unhappy customers.How We Solve It!
Never been done before! For the first time an antenna alignment tool not only aligns the antenna but it will show you where it is pointing. Only RF Vision will allow you to see these obstructions and give Radio Engineers the ability to optimize antenna orientations. A line-of-sight image that is mechanically aligned with the tool will be included on each antenna alignment report. -
Summary
Our comprehensive training class outlines detailed instructions on how to properly operate 3Z products, including mounting procedures, technical features and troubleshooting tips. A Certificate of Completion will be provided upon successfully completing a short quiz at the end of the course.The Problem We Solve
Sometimes antenna alignment measurements can be affected by inexperienced users, generating inaccurate results due to improper tool operation. Even experienced users may benefit from additional technical knowledge on certain features, troubleshooting tips or tricks. As a result, Carriers often require certifications to ensure users are qualified to perform the antenna alignment work.How We Solve It!
Providing a comprehensive technical training enables both experienced and first-time users to properly use 3Z products. Our training outlines in depth operations of technical features, troubleshooting tips and tricks to allow optimum performance. To affirm qualification, a Certificate of Completion will be issued after successfully completing a short quiz at the end of the course. -
Lead time: 1-2 weeks
Summary
RF Vision is an innovative antenna alignment tool that helps users to easily and quickly perform an accurate antenna alignment on panel and microwave point-to-point antennas. With its compact size, rugged design, user friendly GUI, unique reporting capabilities and integrated camera, RF Vision has paved the future for the antenna alignment tool market.See More [+]The Problem We Solve
It is common for Wireless Operators to face network challenges due to the increase of cell overshooting and interference issues on high speed wireless data networks. These challenges degrade network performance, increase customer complaints and grow churn rates. With the increase of data demand, the RAN site installation quality is equally as important. Companies spend millions of dollars to plan and design wireless and microwave networks, but still require skilled personnel at the site to comply with the RF design specifications through dependable tools.How We Solve It!
RF Vision creates a unique experience to the user while properly aligning antennas and improving RAN performance. With Dual Frequency GNSS, a 5” Touch Screen, Built-in Camera, Augmented Reality and automated line-of-sight reports, Wireless Operators can rest assured that antenna field installations and RF Designs will match. An accurate antenna alignment will improve cell performance, maximize voice quality and data traffic, reduce churn, optimize OPEX and keep customers happy. Site test equipment dependability is equally important to Tower Technicians to perform an accurate antenna alignment. RF Vision’s user-friendly GUI and compact size, allows Tower Technicians to optimize the time at site and its rugged design, extra rubber bumpers, weather resistant and impact resistant display ensures durability, avoiding equipment down time.What Comes in the Kit
1-RF Vision Antenna Aligner 1-All-in-one carry-on padded bag 1-Protective Hard Carrying Case 1-Strap Clamp (with 2.5 feet diameter straps) 1-AC/DC Power Charger with multi-region plug adaptors 4-Protective Rubber Bumpers for microwave antennaSize & Weight
Size: L 13 1/4” x W 5 9/16” H x 4 5/8” Weight: 4lbs 3 ozAdd-Ons
-
Summary
Spare hard carrying case for the RF Vision 2000. Rugged; Weather resistant. -
Summary
Spare soft carrying case for the RF Vision 2000. All Weather. -
Summary
Spare AC power charger and USB charging cable for the RF Vision 2000 -
Summary
Spare AC power charger and USB charging cable for the RF Vision 2000 -
Summary
Spare 1-inch black plastic Ratchet Buckle for use with the RF Vision 2000 Universal Strap Clamp (3Z-RFV-BRK-SC2F) -
Summary
Replacement mounting knob for the 3Z-RFV-BRK-SCF2 universal mounting clamp.
